Filter Cleaning

STOP THROWING AWAY YOUR DUST COLLECTOR CARTRIDGE FILTERS!!! WE CAN CLEAN THEM FOR ABOUT HALF THE PRICE OF BUYING NEW ONES!!!

Are you grinding, welding, blasting, powder coating, sanding, mixing, finishing metal, cutting stones or ceramic or wood? Are you creating dust in any way and using a dust collector to clean your air? Then you know that it is very expensive to replace your cartridge filters. If you have a Nordson, Binks, Wagner, Colmet, Deimco or other coating booth we can clean your filters. If you have a Torit, Dust-Hog, Steel Craft, Aercology, AAF or similar cartridge style dust collector we can clean your filters.

We use a DRY cleaning process to clean your filters. We DO NOT use any water, solvents or chemicals in our cleaning process. Water, solvents and chemicals are harsh on your filter and erode the media. This will compromise the integrity of your filter and lower the efficiency of your filters. We use a SONIC DRY CLEAN process. This process combines sonic pulsation with compressed air and vacuums to release the particles from your filters. Using our cleaning process you can expect to receive 100% life out of your cleaned filter. It has also been proven that a filter cleaned by our process actually filters better than a brand new filter. Depending on your application, your filter can be cleaned multiple times resulting in big savings.

We give every filter you send in a serial number. We then weigh the filter and take a static pressure reading. Next we clean the filter. After we clean the filter we weigh it again and take another static pressure reading. Finally, we inspect the filter to make sure it does not have any holes. We document all this and return this information to you with your cleaned filters.

Not only is this process very economical, but it is very environmentally friendly. The average filter from a dust collector has over 200 sq ft of paper media. By recycling these filters we are greatly reducing paper waste. In addition, the average size of one of these filters is about one foot in diameter and over two feet tall. This takes up a lot of landfill space. By recycling these filters we are greatly cutting back on the amount of waste going to the landfill


HOME | USED DUST COLLECTORS | INDUSTRIAL PRODUCTS | COMMERCIAL PRODUCTS | FILTER PRODUCTS |
FILTER CLEANING | PARTS AND SERVICE | CONTACT US | REQUEST INFO | LITERATURE | ABOUT US